![background image](/i/karcher/168265/karcher-br-55-40-c-bp-pack-dose/h/karcher-br-55-40-c-bp-pack-dose-033.png)
-
9
Î
Raise the vacuum bar.
Î
Press the appliance to the bottom using
the push handle.
Î
Turn the running gear to the front with
your foot.
Î
Use the pushing handle to push the ap-
pliance to the place of use.
1 OFF Appliance is out of operation.
2 Scrub cleaning Wet cleaning the floor
and vacuum up dirt water.
3 Wet scrubbing Wet cleaning the floor
and allow the detergent to react.
4 Vacuuming Vacuuming up the deter-
gent solution.
5 Polishing or scrubbing the polishing
floor without the application of liquid.
1
Driving
Driving to the Place of Use.
2
Scrubbing suction
Wet clean the floor and vacuum up dirt
water.
3
Wet scrubbing
Wet clean the floor and allow the deter-
gent to react.
4
Vacuuming
Suck in the dirt fleet.
5
Polishing
Polishing the floor without the applica-
tion of liquid.
6
Scrub the floor without applying wa-
ter (vacuum polishing)
Polish the floor without applying any flu-
id and suck in the polishing dust.
The battery control display shows the
charging status of the batteries when the
charger has been connected:
Use the Info button to select the menu
items and do the settings.
–
Turning the button to the right/left
scrolls through the menus forward/
backward.
–
The selected setting gets accepted by
pressing the button.
You can make the settings for the different
cleaning programs in the operator menu.
Different parameters can be set based on
Cleaning Programs
Cleaning programmes Version BR/
BD... W Bp Pack
Battery control display
40-100%
glows green
20-40%
glows yellow
0-20%
slowly blinks red
empty
glows red
Info button (only BR/BD...W Bp
Pack)
Settings
33
EN