![background image](/i/karcher/169542/karcher-br-55-60-wep/h/karcher-br-55-60-wep-023.png)
English
23
Note
Carry out the initial cleaning attempts with
less contact pressure. Increase contact
pressure step-by-step until the desired
cleaning result is achieved. A correct set-
ting of the contact pressure reduces power
consumption and the wear and tear of the
brushes.
The brush motors come to a halt when the
machine stops and when there is overload.
몇
Warning
Floors can get damaged on account of too
high contact pressure. Carry out the initial
polishing attempts with less contact pres-
sure. Increase the contact pressure as per
requirements until the desired polishing re-
sult is achieved.
To improve the vacuuming result on tiled
floors the vacuum bar can be turned to an
oblique position of up to 5°.
Î
Loosen crossh-handles.
Î
Turn the vacuum bar.
Î
Tighten the cross-handles.
If the vacuum result is unsatisfactory the in-
clination of the straight vacuum bar can be
modified.
Î
Release the wing nuts.
Î
Tilt the vacuum bar.
Î
Tighten the wing nuts.
Î
Close the regulatory button for setting
the water quantity.
Î
Release the safety switch.
Î
Lift the cleaning head.
Î
Briefly drive forward and suck of the re-
maining water.
Î
Raise the vacuum bar.
Î
Apply parking brake (optional). Press
the pedal downwards and move it to the
right to lock it.
Î
Turn the program selection switch to
"OFF".
Setting the Vacuum Bar
Oblique position
Inclination
Shutting Down the Appliance