![background image](/i/karcher/166338/karcher-kmr-1000-t/h/karcher-kmr-1000-t-024.png)
English
KMR 1000 T
24
Rear sealing strip
!
Unscrew the fastening of the
sealing strip
!
Screw on a new sealing strip and
don’t tighten the screws yet
!
Align the sealing strip
!
Adjust the ground clearance of the
sealing strip such that there is a
spacing of 5-10 mm toward the
back
!
Tighten the screws
!
Screw on covers
!
Insert the swept material container
Mount the steering wheel
Align wheels in the direction of travel.
Insert the steering wheel until it rests
on the end of the steering shaft.
!
Slide on the flat washer with the
arched side facing up
!
Fasten the steering wheel with the
enclosed screw (25 mm long, with
adhesive coating) (spanner SW 13)
Place on the cover.
Mount the driver’s seat
!
Slide the driver’s seat to the
desired position
!
Tighten down the driver’s seat
Guide the connecting cable from the
seat contact switch through the notch.
Plug-in the connecting cable to the
seat contact switch.
Check the seat contact (for its
safety function)
Sit on the driver’s seat, raise the main
brush, and press the brake.
♦
Machine should start!
Let down the main brush
♦
Machine must not switch off!
Leave the driver’s seat.
♦
Machine must switch off
Install the trailer hitch
!
Fasten the carrier coupling with two
screws, spring rings and nuts
Note:
♦
Trailing load
max. 120 kg
♦
Fifthwheel load
max. 20 kg
♦
Slope
max. 5 %
Commission the battery
Always heed safety precautions for
handling batteries!
Unscrew cellular seals.
!
Fill up battery chamber with
enclosed battery acid up to MAX
!
Refill battery acid as necessary
!
Screw in cellular seals