12

Chapter 2. Learning the basics

Setting hotkey mode

By default, the hotkey functions are accessible by pressing the appropriate 
hotkey. However, you can disable the hotkey mode in the BIOS setup utility. 
To disable the hotkey mode:
1 Restart the computer. When the Lenovo logo appears, immediately press 

Fn

 + F2 to enter the BIOS setup utility.

2 In the BIOS setup utility, open the Configuration menu, and change the 

setting of HotKey Mode from Enabled to Disabled.

3 Open the Exit menu, and select Exit Saving Changes.

Note:

When hotkey mode is disabled, press the Fn key and the appropriate hotkey to access 

the corresponding hotkey function.