8

ENGLISH

SAFETY INSTRUCTIONS 

y

Please follow the installation instructions below to prevent the product from 

overheating.

- The distance between the product and the wall should be more than 

10 cm.

- Do not install the product in a place with no ventilation (e.g., on a 

bookshelf or in a cupboard).

- Do not install the product on a carpet or cushion.

- Make sure the air vent is not blocked by a tablecloth or curtain.

Otherwise, this may result in fire.

y

Take care not to touch the ventilation openings when watching the TV for 

long periods as the ventilation openings may become hot. This does not 

affect the operation or performance of the product.

y

Periodically examine the cord of your appliance, and if its appearance indicates damage or 

deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an 

exact replacement part by an authorized servicer.

y

Prevent dust collecting on the power plug pins or outlet.  

This may cause a fire hazard.

y

Protect the power cord from physical or mechanical abuse, such as being 

twisted, kinked, pinched, closed in a door, or walked upon. Pay particular 

attention to plugs, wall outlets, and the point where the cord exits the 

appliance.

y

Do not press strongly upon the panel with a hand or sharp object such 

as nail, pencil or pen, or make a scratch on it, as it may cause damage to 

screen.

y

Avoid touching the screen or holding your finger(s) against it for long 

periods of time. Doing so may produce some temporary or permanent 

distortion/damage to screen.

y

When cleaning the product and its components, unplug the power first and 

wipe it with a soft cloth. Applying excessive force may cause scratches or 

discolouration. Do not spray with water or wipe with a wet cloth. Never use 

glass cleaner, car or industrial shiner, abrasives or wax, benzene, alcohol 

etc., which can damage the product and its panel.  

Otherwise, this may result in fire, electric shock or product damage 

(deformation, corrosion or breakage).

y

As long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power 

source even if you turn off this unit by SWITCH.

y

When unplugging the cable, grab the plug and unplug it, by pulling at the 

plug.

Don’t pull at the cord to unplug the power cord from the power board, as 

this could be hazardous.

y

When moving the product, make sure you turn the power off first. Then, 

unplug the power cables, antenna cables and all connecting cables.  

The TV set or power cord may be damaged, which may create a fire hazard 

or cause electric shock.