20 Room Air Conditioner

Maintenance and Service

How to replace picture & photograph (Art Cool Type2)

1. 

Turn off power and then open 
the upper part of front panel. 

2. 

Pull out the both links of lower 
part of front panel, as 
described in the below picture. 

3. 

Push and close the top part of 
the front panel and then pull 
the bottom part of the panel 
forward until it is secured.

4. 

Take out picture.

5. 

Turn upside-down of the 
picture and turn over mat, then 
take off a protective tape 
attached at the mat. 

6. 

Place the picture/photograph 
between the exited picture and 
mat. (Recommended size of a 
photo/picture: 450mm x 
450mm)

7. 

Cover mat and press down 
with hand(s) until contacting 
closely.  

8. 

Slide the photo graph/drawing 

requested under both hanger 
parts as following, and fix them. 
Press the front panel lightly to 
close.

9. 

Push both links of lower part of 
panel inside and fix it. Then 
turn on. 

In case a mat is not used, recommended size of a photo/picture: 
 522mm x 522mm

When powering on after replacing filter and picture, 
the front panel doesn't intervene.

Mat

450mm

450mm

522mm

522mm

Mat

Protective tape