1. Choose a suitable place where its safe & easy

to reach.

2. Fix the holder to wall etc with the supplied

screws firmly.

3. Slide the remote controller inside the holder.

1. Remote controller should never be exposed to

direct sunlight.

2. Signal transmitter & receiver should always be

clean for proper communication. Use a soft
cloth to clean them.

3. In case some other appliances also get

operated with remote control, change their
position or consult your serviceman.

1. The signal receiver is inside the unit.

2. Aim the remote controller towards the unit to operate it.

There should not be any blockage in between.

NOTE

ENGLISH

Owner's Manual  9

Operating Instructions

How to insert the Batteries

Wireless Remote Controller Maintenance

1. Remove the battery cover by pulling it according to the arrow direction.
2. Insert new batteries making sure that the (+) and (-) of battery are

installed correctly.

3. Reattach the cover by sliding it back into position.

1. Always use/replace both batteries of same type.
2. If the system is not to be used for a long time, remove the batteries to

save their working life.

3. If the display screen of remote controller starts, fading replace both of

the batteries.

4. Use 2 AAA(1.5 volt) batteries.

NOTE

Operating Instructions

Operating Method