12

Control Panel Functions

AUTO Button

AUTO IMAGE ADJUSTMENT

When adjusting your display settings, always press
the 

AUTO

button before entering the On Screen

Display(OSD). (Only Analog Mode)

This will automatically adjust your display image to
the ideal settings for the current screen resolution
size (display mode).

The best display mode is

E1950T : 1360 x 768
E2050T : 1600 x 900
E2250T : 1920 x 1080
E2350T : 1920 x 1080

INPUT Button

Use this button to turn the display on or off.

From front view,the power indicator stays purple if the 
display is running properly (On Mode). If the display 
is in Sleep Mode (Energy Saving), the power indicator 
is blinking purple. 

Power Button &
Power Indicator

When two input signals are connected, you can select the
input signal (D-SUB/DVI) you want. When only one signal
is connected, it is automatically detected. The default
setting is D-Sub. 

(SOURCE Hot key)

Exit the OSD(On Screen Display).

EXIT Button 

This is lens for light sensor detect outside luminance,
when setting AUTO BRIGHT ON.

Light Sensor

Use this button to select source from input.