19

ENG

ENGLISH

ASSEMBLING AND PREPARING

Securing the TV to a wall 

(This feature is not available for all models.)

1  Insert and tighten the eye-bolts, or TV brackets 

and bolts on the back of the TV.

 - If there are bolts inserted at the eye-bolts 

position, remove the bolts first.

2  Mount the wall brackets with the bolts to the 

wall. 
Match the location of the wall bracket and the 
eye-bolts on the rear of the TV.

3  Connect the eye-bolts and wall brackets tightly 

with a sturdy rope. 
Make sure to keep the rope horizontal with the 
flat surface.

 CAUTION

y

Make sure that children do not climb on or 
hang on the TV.

 NOTE

y

Use a platform or cabinet that is strong and 
large enough to support the TV securely.

y

Brackets, bolts and ropes are not provided. 
You can obtain additional accessories from 
your local dealer. 

Securing the TV to a table

Fix the TV to a table to prevent from tilting forward, 
damage, and potential injury.
To secure the TV to a table, insert and tighten the 
supplied screw on the rear of the stand.
(Only LN54/53**)

(Only 32/42/47LA643*, 32/42/47LA61**)



2EA

2EA P4 x 8 

(Only 47LA643*, 47LA61**)

M4 x 8 

(Only 32/42LA643*, 32/42LA61**)

 CAUTION

(Only 32/42/47LA643*, 32/42/47LA61**)
How to fix the TV to a table 
1. Connect the Desk-mount Cables to the 

Stand Base using the Bracket Screws.

2. Fix the Desk-mount Cables to a table using 

the Desk-mount Screws.

3. Once the TV is fixed, move the table close to 

the wall. Children may go in, causing injuries.

 WARNING

y

To prevent TV from falling over, the TV 
should be securely attached to the floor/
wall per installation instructions. Tipping, 
shaking, or rocking the TV may cause injury.