Assembling vacumm cleaner
  Carpet and Floor nozzle 
  (depending on model) (1)
  

Push telescopic pipe or dual pipe into the   

  nozzle outlet.
  

Telescopic pipe (depending on model)   

  (2) (5)

  • Push the spring latch to release.
  • Pull out the pipe to the desired length.
  • Release spring latch to lock the pipe
    in position.

  Dual pipe (depending on model) (3)

  Fit together the two pipes by twisting slightly  
  when choose dual pipe.

  Carpet and Floor nozzle 
  (depending on model) (4)

  Push the nozzle into the telescopic pipe.
  

Connecting the hose to the vacuum   

  cleaner (6)

  Push the fitting pipe on the flexible hose into   
  the attachment point on the vacuum cleaner.
  To remove the flexible hose from the vacuum 
  cleaner, press the button situated on the fitting  
  pipe, then pull the fitting pipe out of the vacuum  
  cleaner.

Operating vacuum cleaner
  How to operate (ON/OFF type) (7)

  • Pull out the power cord to the desired length     
    and plug into the socket.
  • Press power switch to start the vacuum 
    cleaner.
  • The flexible hose handle has a manual      
    airflow regulator which allows you to briefly 
    reduce the suction level.
  • Press the cord reel button to rewind the    
    power cord after use.
  

How to operate (Rotary type) (8)

  • Pull out the power cord to the desired length   
    and plug into the socket.

  • Press power switch to start the vacuum  
    cleaner.
  • Slide the rotary control knob to adjust the 
    suction level.
  • The flexible hose handle has a manual air  
    flow regulator which allows you to briefly  
    reduce the suction level.
  • Press the cord reel button to rewind the  
    power cord after use.

  How to operate (Hose slide type) (9)

  • Pull out the power cord to the desired length 
    and plug into the socket.
  • Place the control knob of the hose handle
    to the required position.
  • To turn off, slide control knob to OFF   
    position.
  • Press the cord reel button to rewind the
    power cord after use.

  Park mode (10)

  • To store during vacuuming, for example to  
    move a small piece of furniture or a rug,   
    use park mode to support the flexible hose  
    and nozzle.
  • Slide the hook on the nozzle into the slot
    on the side of vacuum cleaner.

  Storage (11)

  • When you have switched off and unplugged  
    the vacuum cleaner, press the cord reel  
    button to automatically rewind the cord.
  • You can store your vacuum cleaner in a 
    vertical position by sliding the hook on the 
    nozzle into the slot on the underside of the     
    vacuum cleaner.

Using carpet and floor nozzle
  Carpet and floor nozzle (depending on   

  model) (12)

• The 2 position nozzle

    This is equipped with a pedal which allows 
    you to alter its position according to the type 
    of floor to be cleaned.
  

• Carpet or rug position

    Press the pedal to lift the brush up.
  

• Hard floor position (tiles, parquets floor)

    Press the pedal to lower brush.

- 26 -