24

On Screen Display(OSD) Selection and Adjustment 

Press the      ,      buttons to reset immediately.

SETUP

MENU

: Exit
: Adjust
: Adjust

SET    

: Select another  

sub-menu

Main menu

Sub menu

Description

To choose the language in which the control
names are displayed.

To adjust position of the OSD window on the
screen.

LANGUAGE

OSD
POSITION

WHITE
BALANCE

If the output of the video card is different the
required specifications, the color level may
deteriorate due to video signal distortion. Using
this function, the signal level is adjusted to fit into
the standard output level of the video card in
order to provide the optimal image.
Activate this function when white and black colors
are present in the screen. (Only for D-SUB input)   

Restore all factory default settings except

"LANGUAGE." 

FACTORY
RESET

POWER
INDICATOR

Use this function to set the power indicator on the
front side of the monitor to 

ON

or 

OFF

.

If you set 

OFF

, it will go off. 

If you set 

ON

at any time, the power indicator will

automatically be turned on.

NOTE  

If this does not improve the screen image, restore the factory default settings. If necessary, execute the  
white balance function again. This function will be enabled only when the input is a D-SUB input. 

R T C

If you set 

ON

, you enable the Response Time

Control function and reduce the afterimage of the
screen.
If you set 

OFF

, you disenable the Response

Time Control function and operate at panel
response time. (Only W2286L)

D-SUB input

HDMI input

OVERSCAN

It is the function to filter out the noise which may
be generated around the edge of the image when
connecting the HDMI and the external device.
When it is set to ON, the original image is
enlarged with no noise.
When it is set to OFF, the original size is displayed
as it is regardless the noise. (Only for HDMI input)