![background image](/i/lincoln/154861/lincoln-mkt-2014/h/lincoln-mkt-2014-328.png)
CLEANING LEATHER SEATS (IF EQUIPPED)
•
Remove dust and loose dirt with a vacuum cleaner.
•
Clean spills and stains as quickly as possible.
•
For routine cleaning, wipe the surface with a soft, damp cloth. For
more thorough cleaning, wipe the surface with a mild soap and water
solution. Dry the area with a soft cloth.
•
If the leather cannot be completely cleaned using a mild soap and
water solution, the leather may be cleaned using a commercially
available leather cleaning product designed for automotive interiors.
•
To check for compatibility, first test any cleaner or stain remover on
an inconspicuous part of the leather.
•
Do not use household cleaning products, alcohol solutions,
oil/petroleum-based leather conditioners, or solvents or cleaners
intended specifically for rubber, vinyl and plastics. These products
may cause premature wearing or damage to the leather.
CLEANING THE ALLOY WHEELS
Note:
Do not use chrome cleaner, metal cleaner or polish on wheels and
wheel covers.
A clearcoat paint finish coats aluminum wheels and wheel covers.
In order to maintain their condition:
•
Clean weekly with Motorcraft Wheel and Tire Cleaner. Use a sponge
to remove heavy deposits of dirt and brake dust accumulation. Rinse
thoroughly with a strong stream of water when you have completed
the cleaning process.
•
To remove tar and grease, use Motorcraft Bug and Tar Remover.
•
Never apply any cleaning chemical to hot or warm wheel rims or
covers.
•
Some automatic car washes may cause damage to the finish on your
wheel rims or covers.
•
Industrial-strength (heavy-duty) cleaners, or cleaning chemicals, in
combination with brush agitation to remove brake dust and dirt, could
wear away the clearcoat finish over time.
•
Do not use hydrofluoric acid-based or high caustic-based wheel
cleaners, steel wool, fuels or strong household detergent.
•
If you intend on parking your vehicle for an extended period after
cleaning the wheels with a wheel cleaner, drive your vehicle for a few
minutes before doing so. This reduces the risk of increased corrosion
of the brake discs.
Vehicle Care
327
2014 MKT
(mkt)
Owners Guide gf, 2nd Printing, December 2013
USA
(fus)