![background image](/i/lincoln/154861/lincoln-mkt-2014/h/lincoln-mkt-2014-359.png)
6. Remove the wheel cover (if equipped) with the lug wrench tip and
loosen each wheel lug nut one-half turn counterclockwise, but do not
remove them until the wheel is raised off the ground.
7. The vehicle jacking points are
shown here, and are depicted on the
yellow warning label on the jack.
Note:
Jack at the specific locations
to avoid damage to the vehicle.
8. Put the jack in the jack notch next to the
tire you are changing. Turn the jack handle
clockwise until the wheel is completely off
the ground.
9. Remove the lug nuts with the lug
wrench.
10. Replace the flat tire with the spare tire, making sure the valve stem
is facing outward. Reinstall the lug nuts until the wheel is snug against
the hub. Do not fully tighten the lug nuts until the wheel has been
lowered.
11. Lower the wheel by turning the jack handle counterclockwise.
12. Remove the jack and fully tighten the
lug nuts in the order shown. See
Wheel Lug
Nut Torque Specifications
later in this
chapter for the proper lug nut torque
specification.
13. Install the wheel cover.
358
Wheels and Tires
2014 MKT
(mkt)
Owners Guide gf, 2nd Printing, December 2013
USA
(fus)