Инструкция для Lincoln MKZ Hybrid (2011)

(скачивание инструкции бесплатно)

Формат файла: PDF

Доступность: Бесплатно как и все руководства на сайте. Без регистрации и SMS.

Дополнительно: Чтение инструкции онлайн

MULTI-FUNCTION LEVER

Windshield wiper:

Rotate the end

of the control away from you to
increase the speed of the wipers;
rotate toward you to decrease the
speed of the wipers.

Rain-sensing wipers (if
equipped):

The rain-sensing wipers

will automatically activate when
moisture is present on the
windshield and the multi-function
switch is set to one of five
auto/interval moisture sensitivity settings. Rotate the end of the control
toward the windshield to increase the sensitivity. The speed of the
rain-sensitive wipers will vary based on the amount of moisture detected
on the windshield and the auto/interval setting. There are no interval
(intermittent wipe) settings on vehicles with rain-sensing wipers. The
wipers will continue to wipe as long as the presence of moisture is
detected on the windshield. More or less wiping may occur depending on
humidity, mist or light rain, or road spray.

Keep the outside of the windshield clean, especially the area around the
rear view mirror where the sensor is located or rain sensor performance
may be affected.

Note:

During winter driving conditions with ice, snow or a salty road

mist, inconsistent or unexpected wiping or smearing may occur. In these
conditions, you can lower the sensitivity to reduce the amount of
smearing or override the feature by selecting low- or high-speed wiping
or turning the wiper system off.

Note:

The wipers must be turned off before entering a car wash.

Windshield washer:

Press the end

of the stalk:

•

briefly: causes a single swipe of
the wipers without washer fluid.

•

a quick press and hold: the
wipers will swipe three times with
washer fluid.

•

a long press and hold: the wipers
and washer fluid will be activated
for up to ten seconds.

Driver Controls