Voice recognition visual feedback
When Voice recognition (VR) is activated, the following icons will appear
in the status bar.
VR State
VR Icon
Main Menu/Generic
VR recognition failure
VR session unsuccessful
?
Listening
Listening paused
Speaking instructions
For the best voice recognition, please ensure that:
•
The interior of the vehicle needs to be as quiet as possible. Wind noise
from open windows and road vibrations may prevent the system from
correctly recognizing voice commands.
•
Press
or VOICE and wait until the second tone sounds before
speaking a command.
•
Speak naturally without large pauses in between words.
•
Speak louder if background noise is preventing the system from
recognizing your command
•
Only one person should speak while the system is listening for a
command.
•
Please realize voice recognition performance is not 100% and varies by
user. The voice recognition system is meant to be a secondary
convenience control and if it doesn’t operate optimally, you can still
operate your system via the touch screen and hard buttons.
To speak voice commands:
Depending on the feedback setting, the system will respond differently. If
the feedback settings are set to ‘Standard’, the system will respond with a
tone, a prompt and another tone. If the feedback settings are set to
Advanced, the system will respond without a prompt and with tones only.
1. Press
or VOICE on the steering wheel. A tone will sound.
2. The system will say, “Please say a command” and VOICE/Main Menu
and
will appear in the status bar.
Voice recognition system overview
34
2012 Centerstack
(ng1)
Supplement, 3rd Printing
USA
(fus)