![background image](/i/loewe/155205/loewe-assist-homecinema/h/loewe-assist-homecinema-018.png)
- 18
English
Code entry
Remote control codes for known units (see list from page 95) can be selected
from the integrated database. The four
TV, STB, DVD
and
AUDIO
buttons can
be set for the operation of various units.
➠
The
TV
button can only be set with the codes from the
TV
list. The
STB,
DVD
and
AUDIO
buttons can only be set with the codes from the
STB
list.
Press the
TV, STB, DVD
or
AUDIO
button and at the
same time press the
OK
button for 5 seconds.
The LED above the button for the unit (e.g.
TV
) flashes
twice.
Enter the three digit code (list from page 95).
The LED above the button for the unit (e.g.
TV
) flashes
once.
To end the programming mode, press the
OK
button
again.
The LED above the button for the unit (e.g.
TV
) flashes
twice.
Reading out the code
You can read out the currently set code. The numbers of the code are displayed
by the flashing of the LED above the particular button for the unit.
Press the
TV, STB, DVD
or
AUDIO
button and at the
same time press the
OK
button for 5 seconds.
The LED above the button for the unit (e.g.
TV
) flashes
twice.
Press the
INFO
button.
The LED allocated to the button for the unit displays the
three digit code by flashing several times. The numbers
are displayed from left to right in three flashing
sequences. Examples:
The number 1 is for example displayed by one flash.
The number 6 is for example displayed by six slow
flashes.
The number 0 is displayed by five quick flashes.
Operating other units
_35172_Assist_HC_Buch.indb 18
19.01.2012 11:28:34