![background image](/i/loewe/154702/loewe-xelos-40-xelos-32-xelos-46/h/loewe-xelos-40-xelos-32-xelos-46-073.png)
73 -
english
Setting the pre-record and post-record time
For timer recordings, a lead and follow-up time can be set. This minimises
the risk of a part of the broadcast not being recorded due to the broadcast
starting earlier and/or finishing later.
MENU:
Call
TV menu
.
Choose
Recording
,
switch to the menu line below.
Set
pre-record
or
post-record time
,
switch to the menu line below.
Enter the time using the
numeric buttons
(always 2-digit:
01 to 15 mins for pre-record time; 01 to 60 mins for
post-record time). Factory setting: pre-record:
00 min
,
post-record:
00 min
.
Archive recording – Direct recording
➠
For recording encrypted broadcasts, please also refer to the informa-
tion on pages 84 and 85.
Press
RECORD button
briefly: Start direct recording.
The
Recording duration
selection is called.
Select desired recording time.
current programme:
The broadcast being watched is
adopted in the archive.
??? :
Manually enter the recording dura-
tion with the numeric buttons of the
remote control.
OK
Confirm.
Call
Timer data
.
Check the timer data, change if necessary and confirm
with
OK
. The recording is started.
See page 76 for explanations of the setting options in the
Timer data
menu.
Post-record time
Recording wizard Tim
er list
PRE-RECORD TIME
If you record a programme without VPS, you can enter a time span here
specifying how long before the scheduled time your programmed recording
should start so that programmes which begin too early are recorded in full.
TV MENU
Recording
Pre-record time
(0-15 min) 00
Digital Recorder
OK
RECORDING DURATION (MIN.)
current programme
confirm
30 60 90 120 180 240 ???
OK
TIMER DATA
09:45 Bon(n) jour Berlin
Parental lock
confirm
Recorder USB
Station 45 Phoenix
ۻ
Date 05.02.2010
Recording time 09:45 until 10:00
Recording
type once
only