[Страница 2/16] - Руководство по эксплуатации: студийный монитор M-AUDIO BX5

Инструкция для M-AUDIO BX5

(скачивание инструкции бесплатно)

Формат файла: PDF

Доступность: Бесплатно как и все руководства на сайте. Без регистрации и SMS.

Дополнительно: Чтение инструкции онлайн

Introduction

Thank you for choosing the BX5 Studiophile Series bi-amplified studio nearfield
monitor speakers. M-Audio is well known for digital audio interface technology,
digital converters, audio preamps and mixers. Now, after extensive research and
development, the Studiophile BX5 is born to change the concept of studio
reference monitoring.

The BX5 was designed and tested by veteran audio engineers to meet your needs
in a studio monitoring environment. It is focused on the functional goal of
delivering pure, original sound without any additional coloration.The BX5 monitor
is self-powered, directly accepting a line level signal from a variety of sources.

The Studiophile BX5 is designed to overcome all the limitations of conventional
studio reference monitors within the digital audio environment. This system
delivers a wide range frequency response by employing two extraordinary
drivers and unique crossover technology licensed by M-Audio. It boasts a stable
and balanced low-mid frequency response along with a defined mid- and high-
frequency response as well. Both drivers are magnetically shielded for desktop
music production.

From pro engineers at commercial studios to home studio owners, the
Studiophile BX5 sets a new affordable standard in studio monitoring.

What’s in the Box?

Your Studiophile BX5 box contains:

•

Two BX5 speakers

•

Two detachable AC power cords

•

This manual

•

Actual test results of the BX5 you purchased

Studiophile BX5 Features

1. Woofer

The woofer unit is 5 inches in diameter with a magnetically shielded
mineral-filled polypropylene cone, high-temperature voice coil and damped
rubber surround. It is designed to deliver balanced mid- and low- frequency
response. Polypropylene is used to react against the input signals accurately and
to deliver even minimal input precisely while minimizing distortion.

Оглавление инструкции

Страница 1 из 17
Studiophile BX5 Users Manual Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 What’s in the Box? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Studiophile BX5 Features . . . . . . . . . . . . . . . . . . . . .
Страница 2 из 17
Introduction Thank you for choosing the BX5 Studiophile Series bi-amplified studio nearfield monitor speakers. M-Audio is well known for digital audio interface technology, digital converters, audio preamps and mixers. Now, after extensive research and development, the Studiophile BX5 is born to
Страница 3 из 17
2. Tweeter By employing a specially developed 1-inch silk dome with magnetic shielding, the tweeter can deliver distortion-free original sound and offer extremely natural response. It minimizes reaction time by using fabric silk for excellent delivery, and also minimizes resonance by adapting a
Страница 4 из 17
Front and Rear Panel Features Rear Panel 1. XLR INPUT: This jack accepts XLR input connections with either balanced or unbalanced wiring. The input wiring of an XLR connector should be as follows: XLR PIN 1 XLR PIN 2 XLR PIN 3 Signal ground (Shield) Signal positive (+) Signal negative (–) 2. TRS
Страница 5 из 17
The TRS input is summed through a balanced input amplifier with the XLR input, allowing both inputs to be used simultaneously. Input specifications apply to both. 3. PRODUCT LABEL: This label contains the model and serial number information. 4. VENT PORT: This port aids in reproduction of very low
Страница 6 из 17
Front Panel The front panel houses the Power LED, which indicates whether the speakers (amplifier) power is on or off. Installation For optimal performance of the BX5, please read the following thoroughly and carefully prior to installation. Precautions Handling: Please do not touch the speaker
Страница 7 из 17
Correct Power Operation: Since the BX5 contains its own amplifier, it must be connected to a power outlet using the detachable AC cable provided. Before connecting power, please make sure that the Voltage-Select Switch located on the speaker’s rear panel is set to the appropriate position, as
Страница 8 из 17
Connecting to Preamp, Computer or Game Console Outputs Before connecting, make sure the output device’s power has been turned off. Plug the XLR balanced, TRS balanced or TS unbalanced cable to the corresponding output connectors of a pre-amplifier, computer or game console. Setting the EQ Switches
Страница 9 из 17
Mid-Boost:This 2-position switch selects between the “In” and “Out” Mid-Boost modes.The Out mode produces a flat midrange response for normal monitoring conditions, while In will move the sound stage forward toward your listening position. 'Mid-Boost In' High-Freq:This 3-position switch selects
Страница 10 из 17
Setting the Acoustic Space Switch The Acoustic Space switch is a 3-position switch used to select the "Acoustic Space" in which the speaker is placed—Half Space (speakers against wall, 0dB position), Three-Quarter Space (speakers in corners or close to wall, -2dB position), or Full Space (speakers
Страница 11 из 17
Placing the BX5 Placing the speakers is one of the most important procedures in order to monitor sound accurately. To monitor with the BX5s performing to their maximum capability, an appropriate listening environment and correct placement are required. Please refer to the following for correct BX5
Страница 12 из 17
Appendix A - Technical Specifications Type: Two-way studio reference LF Driver: 5-inch dia., magnetically-shielded with curved mineral-filled polypropylene cone, high temperature voice coil and damped rubber surround HF Driver: 1-inch dia., magnetically-shielded with natural silk dome Frequency
Страница 13 из 17
Mid-Freq. Switch High-Freq. Switch BX5 Low Cutoff Switch 56Hz / 80Hz / 100hz L 13 3.0 Filter 3.0 Filter 38 38 Appendix B - Block Diagram
Страница 14 из 17
Technical Support & Contact Information For additonal help, contact M-Audio Technical Support by telephone (626-445-7556, 9-5 PST M-F), by fax (626-445-8407) or by e-mail (techsupt@m-audio.com). If you have any questions, comments or suggestions about this or any M-Audio product, we invite you to
Страница 15 из 17
Your BX5 Warranty M-AUDIO warrants that this product is free of defects in materials and workmanship under normal use for a period of One (1) year from purchase date, so long as the product is: owned by the original purchaser; the original purchaser has proof of purchase from an authorized M-AUDIO
Страница 16 из 17
Notes: BX5-111402 16
Страница 17 из 17

Инструкция для M-AUDIO BX5

Инструкции и руководства похожие на M-AUDIO BX5

Другие инструкции и руководства из категории студийный монитор