5 

Front Panel 

 
The front panel houses the Power LED, which 
indicates whether the speakers (amplifier) power 
is on or off. 
 
1.

Power LED 

2.

HF Driver

 (tweeter) 

3.

LF Driver

 (woofer) 

Installation 

 
For optimal performance of the BX8 D2, please read the following thoroughly and carefully prior 
to installation. 
 

Precautions 

•

Handling:

 Please do not touch the speaker cones. The BX8 D2 set is packaged in the box 

tightly, so your attention is required when taking the monitors out of the box. To avoid 
possible damage to the speaker units, hold both sides of the monitor in order to pull it out 
of the box. The speaker cones should not be touched in order to avoid damage even after 
they are out of the box. 

•

Correct Power Operation:

 Since the BX8 D2 contains its own amplifier, it must be 

connected to a power outlet using the detachable AC cable provided. Before connecting 
power, please make sure that the Voltage-Select Switch located on the speaker's rear 
panel is set to the appropriate position, as described in the rear-panel features list 
appearing earlier in this manual. 

WARNING!

 Use of improper Voltage-Select Switch combinations may result in hazardous 

conditions and/or damage to speaker components not covered by speaker warranty. 

•

Connections:

 You can connect either an XLR balanced cable or TRS 

balanced/unbalanced cable from the input of each BX8 D2 to your corresponding preamp, 
computer or game console outputs. We recommend that you use high-quality balanced or 
unbalanced cables for input connections. Also, ALWAYS turn off the power of the BX8 D2 
and turn the volume of the BX8 D2 down to a minimum before making the necessary 
connections. 

BX8

2

1

3