7 

Technical Specifications 

Type 

2-way near-field studio reference monitors 

LF Driver 

8-inch (203 mm) Kevlar curved cone with high temperature voice 
coil and damped rubber surround, magnetically shielded 

HF Driver 

1-inch (25 mm) magnetically shielded natural silk dome 

Frequency Response 

38 Hz – 22 KHz 

Crossover Frequency 

2.2 KHz 

LF Amplifier Power 

70 W 

HF Amplifier Power 

60 W 

Signal-to-Noise Ratio

> 100 dB typical A-weighted 

Input Connectors

1 x XLR balanced input connector 
1 x TRS balanced/unbalanced input connector 

Polarity 

Positive signal at + input produce outward LF cone displacement 

Input Impedance 

20 K

Ω

balanced, 10 K

Ω

unbalanced

Input Sensitivity 

85 mV pink noise input produces 90 dBA output SPL at 1 meter 
with volume control at maximum 

Protection 

RF interference, output current limiting, over temperature, turn-
on/off transient, subsonic filter, external mains fuse. 

Indicator 

Power on/off indicator on rear panel 

Power Requirements 

Factory-programmed for 115 V ~50/60 Hz, 230 V ~50/60 Hz, or 
100 V ~50/60 Hz 

Cabinet 

Vinyl-laminated high-acoustic-efficiency MDF 

Dimension  

(height x width x depth)

15" x 10" x 12" 
381 mm x 254 mm x 305 mm 

Weight  

(without packing)

26.4 lbs. 
12 kg 

* Specifications are subject to change without notice.