10
Warranty Information
Warranty Terms
M-Audio warrants products to be free from defects in materials and workmanship,
under normal use and provided that the product is owned by the original, registered
user. Visit www.m-audio.com/warranty for terms and limitations applying to your
specific product.
Warranty Registration
Thank you for registering your new M-Audio product. Doing so immediately both
entitles you to full warranty coverage and helps M-Audio develop and manufacture
the finest quality products available. Register online at www.m-audio.com/register to
receive FREE product updates and for the chance to win FREE M-Audio gear.
Appendix A - Technical Specifications
Type:
Two-way studio reference
LF Driver:
4-inch dia., magnetically-shielded with curved cone, high temperature voice
coil and Cellulose impregnated fabric roll surround.
HF Driver:
1-inch dia., magnetically-shielded with specially shaped Mylar dome
Frequency Response:
70Hz - 20kHz
Crossover Frequencies:
2.6kHz
RMS SPL:
101.5dB @ 1 meter
Dynamic Range:
>95dB
S/N Ratio:
>90dB (typical, A-weighted)
Input Connectors:
Left and Right RCA Line Input connectors, Left and Right TRS
balanced/unbalanced input connectors.
Polarity:
Positive signal at + input produces outward low-frequency cone
displacement
Dynamic Power:
18 watts/ 4 ohms with 2 channels connected
Input Impedance:
20k ohms balanced, 10k ohms unbalanced
Input Sensitivity:
100 mV pink noise input produces 90dBA output SPL at 1 meter with
volume control at maximum
Protection:
RF interference, output current limiting, over temperature, turn on/off
transient, subsonic filter
Indicator:
Blue power LED on front panel
Power Requirements:
120V/~60Hz, 230V/~50Hz or 100V/50Hz/60Hz; powered via
detachable 2-circuit line cord
Cabinet:
vinyl-laminated MDF
Dimensions:
8.5 inch (H) x 5.75 inch (W) x 6.25 inch (D)
Weight:
12 lbs./pair (approx., without packing)
* Above specifications subject to change without notice
