Appendix A: Technical Specifications
13
Appendix A: Technical Specifications
GSR10
Above specifications subject to change without notice
Type
Active two-way bass reflex design
Frequency Response
+/– 3 dB: 72 Hz to 16 kHz (Mode set to Normal)
Frequency Range
57 Hz to 18 kHz (–10 dB) (Mode set to Normal)
Crossover
Pattern: 90° H x 60° V nominal
Crossover Frequency: 2.8 kHz
24 dB/octave 4th-order alignment
System Power Rating
250 W continuous, 500 W peak
Maximum SPL
121 dB
Nominal Impedance
8 Ohms
LF Driver
10-inch (254mm) neodymium magnet woofer with 2 1/2-inch voice coil
200 W continuous at driver impedance
HF Driver
1-inch (25mm) titanium diaphragm, neodymium magnet compression driver
50 W continuos at driver impedance
High-Pass Filter (HPF)
75 Hz
Input
Balanced XLR/TRS (1/4-inch) combo jack with XLR loop through
Pole Socket
1 3/8-inch (36mm) pole mount socket with stabilizing screw
Mounting
5 x M10 suspension points (2 bottom, 2 top, 1 rear)
AC Input
220–240 VAC ~ 50 Hz
100–120 VAC ~ 60 Hz
Dimensions (H x W x D)
21.9” x 13.7” x 11.2” (55.62cm x 34.8cm x 28.45cm)
Net Weights
25 lbs (11.3 kg)
