FEATURES

Auto shut off. Auto calibration 
Auto zero tracking and Auto backlight 
Low battery indication and 8 mode conversion 
Large LCD (6digits 15 mm high)  
Large square stainless steel weighing tray 
Net weight/stability indication 
0.1 gram division with professional accuracy  

PARTS DESCRIPTIONS

Side

AC adaptor 
Socket  

Top

Weighing platform: The arch face of platform is front, Correct the direction of the pan. 
Protectors: Remove these before use 
Display 
ON/OFF key: Turns the scale Power on/off. 
MODE key; Changes weighing units, g/oz/ozt/dwt/lb/gn/ct/n. ZERO key (for TARE): Sets display to zero 
or Subtracts weight of a container.  

Bottom

Battery compartment, Battery compartment cover, Batteries: Use 6 AA batteries 
Zero indicator: Indicates when the scale zero is correct. Weighing unit 
Stable indicator: Indicates when the reading is stable. 
Low battery indicator  

PREPARATION

Installing batteries/Connecting the AC adaptor

Remove the battery compartment and insert six Dry batteries(R6P/LR6/AA size) into the battery 
compartment. Use extreme care that the polarities plus and minus are correct.  

Plug the AC adapter to the AC adapter socket on the side. The AC input requirement could be 
100,120,220,230 or 240Volts (50/60Hz) depending on the area where used, so please verify that the 
adaptor is correct.  

Setting up the i500

Caution:

 Avoid placing the scale in direct sunlight, this may cause discoloration or malfunction. Place 

your i500/i1200 on a firm weighing table so that the scale is level. (The scale will not perform accurately 
when it is not level.) Make sure there are absolutely NO air currents or vibrations. They can cause 
inaccurate readings.