Test by RJ45 cable (NF-468/NF-468L/NF-468B/NF-468BL)

1. Switch on the power, choose"ON" or "S", the power light 

    will turn on.

2. If UTP tested, the lights of the main tester and remote tester 

    will turn on sequently from 1 to 8 and circulates;If STP tested,

    the lights of the main tester and remote tester will turn on 

    sequently from 1 to G and circulates.

3. If the cable is breakage, disorder, short circuit, the result is

    as what was said above.

4. After operation, turn off the tester.

NF-468 Main Tester

NF-468 Remote Tester

RJ45 network cable

Your excellent helper in cable test!

3

CABLE TESTER

LAMP

NF-468BL

NF-468BL