Test by BNC ( NF-468B/NF-468BL)

1. Switch on the power, choose"ON" or "S", the power light 

    will turn on.

2. Connect R 45 port of BNC adapter with remote tester. then 

J

    insert one end of BNC cable into BNC port of main tester,

    the other end into BNC connector. The lights of the main 

    tester and remote tester will turn on sequently from 1 to 2 

   and circulates. 

3. If the cable is breakage, disorder, short circuit, the result is 
    as what was said above.
4. After operation, turn off the tester. 

BNC cable

NF-468B Main Tester

NF-468B Remote Tester

BNC to RJ45 

Connector

Your excellent helper in cable test!

5

CABLE TESTER

LAMP

NF-468BL

NF-468BL