Electric wire tracing function

1. Directly insert  RJ11 of crococile clip into RJ11 port of emitter, connect 
    telephone line with the clamp;
2. Push DIP switch of emitter to position of 

”

SCAN

”

then wire finding 

    indicator  

“

STATUS

”

flashes which means normal work of emitter;

3. Press the inching button, use the  probe of receiver  to find target wire at
    the other end;
4. During testing, function switchover button can be pressed for switchover 
   of dual-tone.

Note: The equipment is prohibited to be used on heavy-current wires

Connect emitter with 
electric wire to be found

How to find the wire from among so many wires?
It is so slow by using a multimeter.

No need electric machine to drill !

Your excellent helper in cable test!

04