Note: The equipment is prohibited to 

           be used on heavy-current  wires

It can take place  of 
cable tester

Support direct wire collation 
of operating switch

Replace the above 
tester in cabling

It can rapidly test open circuit/short 
circuit and crossing through the 18 
status indicators. which is accurate
and clear. 

Network wire Collation function

1. Insert  the  two ends of the network
 wire into Rj45 port  emitter and receiver.
2. Push function switchover button on

    emitter to the position of 

“

TEST 

”

,  

   testing indicator 

“

VERIFY

”

 flashes 

   meaning normal work of emitter.
3. According to 18 indicators, judge 

  the characteristics of short-circuit, 

   breaking circuit, open circuit and 
   crossing.   
4.During testing, function switchover button can be pressed for switchover 
   of fast and slow levels.

Your excellent helper in cable test!

05