![background image](/i/oki/156748/oki-b721dn/h/oki-b721dn-061.png)
- 61 -
Connecting to a Computer
3
3.
Printing
8
[
Implementing PIN method…
] is
displayed on the screen.
䣋䣰䣲䣮䣧䣯䣧䣰䣶䣫䣰䣩䢢䣒䣋䣐䢢䣯䣧䣶䣪䣱䣦䢰䢰䢰
䣒䣋䣐䢢䣥䣱䣦䣧䢼䢢䢴䢳䢺䢹䢳䢸䢻䢸
Note
● Panel operations cannot be performed during WPS
execution.
● When [
Connection successful
] is displayed, this
equipment is connected to the wireless LAN.
䣙䣒䣕䢢䣥䣱䣰䣰䣧䣥䣶䣫䣱䣰䢢䣵䣷䣥䣥䣧䣵䣵䣨䣷䣮䢰
䣙䣫䣴䣧䣦䢢䣥䣱䣯䣯䣷䣰䣫䣥䣣䣶䣫䣱䣰䣵䢢
䣦䣫䣵䣣䣤䣮䣧䣦䢰
Memo
● If [
Timeout
] is displayed, it is possible that the
access point of the connection destination could not
be found within the time limit. After entering the PIN
code from this equipment into the access point and
starting WPS-PIN, select [
Yes
] in step 7 again within
2 minutes.
Configuring manually
1
Check and write down the SSID,
encryption scheme, and cryptography
key.
You can check the SSID, encryption scheme, and
cryptography key in the instruction manual for
the access point of the Wireless LAN.
Note
●
It is necessary to set the same SSID, encryption
scheme, and cryptography key for the access point of
the Wireless LAN on the printer.
●
The SSID, encryption scheme, and cryptography key
are essential for the Wireless LAN connection. Be
sure to check them.
2
Press the scroll button
to select
[
Wireless Setting
] and then press the
<
ENTER
> button.
䣈䣷䣰䣥䣶䣫䣱䣰䣵䢢䢢䢢䢢䢢䢢
䢢䢢䢢
䢴䢱䢵
䣃䣦䣯䣫䣰䢢䣕䣧䣶䣷䣲
䣒䣴䣫䣰䣶䢢䣕䣶䣣䣶䣫䣵䣶䣫䣥䣵
䣙䣫䣴䣧䣮䣧䣵䣵䢢䣕䣧䣶䣶䣫䣰䣩
䣏䣧䣰䣷䣵
3
Enter the administrator password,
using the ten-key pad, then press the
<
ENTER
> button.
The factory default password is “aaaaaa”. Press
the <
ENTER
> button whenever inputting one
character.
䣇䣰䣶䣧䣴䢢䣒䣣䣵䣵䣹䣱䣴䣦
4
Press the scroll button
to select
[
Manual Setup
] and then press the
<
ENTER
> button.
䎰䏄䏑䏘䏄䏏䎃䎶䏈䏗䏘䏓
䎺䏌䏕䏈䏏䏈䏖䏖䎃䏕䏈䏆䏒䏑䏑䏈䏆䏗䏌䏒䏑
䎤䏘䏗䏒䏐䏄䏗䏌䏆䎃䎶䏈䏗䏘䏓䎃䎋䎺
䎳䎶䎌
䎺䏌䏕䏈䏏䏈䏖䏖䎃䎶䏈䏗䏗䏌䏑䏊䎃䎃
䎃䎃䎃
䎔䎒䎔