![background image](/i/olympus/25023/olympus-scan-r-acquisition/h/olympus-scan-r-acquisition-058.png)
52
Chapter 6 – System Configuration
6.1 System Configuration
Upon installation of the scan^R screening station all hardware components have to be configured for
the system to work properly. The configuration has to be adjusted if changes are made, for example, if
new filters are added of if an autoloader robot is to be integrated.
The execution of the System configuration command is password protected.
The System
System Configuration command gives access to the Hardware configuration window
with different tabs (see following chapters):
• Devices and ports to select the available hardware components and configure the PC ports
• Microscope to select objectives, filters and contrast inserts
• MT20 to select the excitation filters of the fluorescence illumination system
• Error reporting
• Remote
The System
Stage Calibration command allows an absolute calibration of the stage with hard-coded
well plate types. This is not to be confused with the stage initialization that is being carried out each
time the software is started (see Chapter 6.2,
Stage Calibration
).
6.1.1 Devices and Ports