5. Advanced User Guidebook 

channel CH1:   

1.

Press 

Cursor

 and recall the Cursor Measure menu.   

2.

Press the 

H2

 button and choose 

CH1

 for 

Source

. 

3.

Press the 

H1

 button, the 

Type

 menu will display at the right of the screen. 

Press the 

F3

 button to select 

Time 

for

 Type

, with two purple dotted lines 

displayed along the vertical direction of the screen, which indicating Cursor 
1 and Cursor 2.   

4.

According to the measured waveform, adjust the positions of Cursor1 and 
Cursor2 by turning the 

VERTICAL POSITION 

knob

of CH1 and CH2. 

The cursor increment window at the left bottom of the waveform shows 
absolute difference, frequency and the present time of the two cursors. 

Fig.5-59

 Waveform of Cursor Measurement   

The Cursor Measurement for FFT mode: 

Press the 

Cursor

 button to display the cursor measurement function menu (CURS 

MEAS) in the screen, which includes 

Vamp

 Measurement and 

Freq

 Measurement at 

the mode of FFT, shown as 

Fig.5-60

. 

65