33
2
4
Press the setting button (SET) to blink 0.0 for setting
exposure compensation. Then set the number by rotating
the adjustment dial.
• The exposure compensation can be set in the range of
-4.0 to +2.0 (1/3, or 1/2 step). (Refer to page 18.)
5
Press the setting button (SET) to complete the setting.
6
Set the zoom position (flash coverage angle).
• The setting method differs according to your camera and
lens. (Refer to page 21.)
7
Check the effective flash range on the LCD panel.
8
Confirm that the subject is within the effective flash range
and the Ready lamp is lit. Then take a picture.
• Please read the camera’s operating manual for camera
operation.
• High-speed sync mode is possible with the camera
separated (wireless) from this flash unit.
AF360FZ_540FGZ.book Page 33 Friday, December 20, 2013 6:11 PM