45
2
(Preparation of the Flash Unit Attached to the Camera)
1
Set a channel of the flash unit attached to the camera.
1 Turn the camera off and then attach this flash unit to the
hot shoe of the camera.
2 Turn on the power switch (ON).
3 Press the flash mode button (MODE) a number of times
to display P-TTL
MASTER on the LCD panel.
4 Set a channel (CH1 through CH4) from the function
menu.
• Refer to “Using the Function Menu” (page 36) for
details on the function menu.
5 Press and hold the function button (
) to complete
the setting.
Using Both Flash Units as Main Flashes
Wireless mode
(MASTER)
Use both flash units as main flashes.
1
AF360FZ_540FGZ.book Page 45 Friday, December 20, 2013 6:11 PM