49
G
ett
ing
St
arte
d
2
1
Slide the battery cover unlock
switch in the direction of
the arrow (
1
), and open
the battery cover (
2
).
2
With the
2
mark facing towards
outside of the camera, push the
battery in until it locks into place.
To remove the battery, push the battery
lock switch in the direction of
the arrow (
3
).
3
Close the battery cover.
The battery cover is locked.
Inserting/Removing the Battery
•
Do not open the battery cover or remove the battery while the power is on.
•
Insert the battery correctly. If the battery is inserted incorrectly, it may not
be removed. Wipe the electrodes of the battery with a soft dry cloth before
inserting.
•
Be careful as the camera or battery may become hot when the camera
is used continuously for a long period of time.
•
Remove the battery when you will not use the camera for a long while.
The battery may leak and damage the camera if left installed during
prolonged periods of non-use. If the removed battery will not be used for six
months or longer, charge the battery for about 30 minutes before storing it.
Be sure to recharge the battery every six to twelve months.
•
Store the battery in a location where the temperature will remain below
room temperature. Avoid locations with high temperatures.
•
The date and time may be reset if you leave the battery out of the camera
for a long period of time. If this occurs, follow the procedure described in
“Setting the Date and Time” (p.62) to set the current date and time.
1
2
3
K-500.book Page 49 Friday, June 14, 2013 2:29 PM