97
Sh
oo
ting
Fu
nctio
ns
4
3
Use the four-way controller (
45
)
to select
k
or
l
, and press
the
4
button.
The camera returns to the control panel.
4
Press the shutter release button halfway.
k
appears on the monitor and the
Shake Reduction function is activated.
k
Uses Shake Reduction. (default setting)
l
Does not use Shake Reduction.
Be sure to turn the Shake Reduction function off when using the camera with
a tripod.
• You can also change the setting from the [
A
Rec. Mode 3] menu (p.66).
• [Shake Reduction] is fixed to
l
in the following situations.
- Self-timer shooting
- Remote Control shooting
- when the shutter speed is set to
h
• [Shake Reduction] is fixed to
k
when the capture mode is set to
Z
(Night
Scene HDR) or
p
(HDR) of
H
(Scene) mode.
• You can select whether to use the Shake Reduction function only when
taking pictures or during standby mode as well with [4. Shake Reduction
Options] (p.68) from the [
A
Custom Setting 1] menu.
• The Shake Reduction function will not fully work (for about 2 seconds) right
after turning on the camera or restoring from Auto Power Off. Wait for the
Shake Reduction function to work stably and properly, and then press the
shutter button gently.
• The Shake Reduction function is available with any PENTAX Q-mount lens
compatible with this camera.
Shake Reduction
Shake Reduction
On
On
Cancel
Cancel
OK
OK
OK
MENU
1/
2000
1/
2000 F2.8
F2.8
1600
1600
[ 37]
[ 37]
PENTAX Q_ENG.book Page 97 Monday, August 29, 2011 8:43 AM