ENG-

16

C

O N N E C T I O N S

Connecting to a TV (S-V

ideo)

-

Connecting to your TV using an S-Video cable.

- You will enjoy high quality images. S-Video separates the picture element into black and white(Y)

and color(C) signals to present clearer images than regular video input mode. (Audio signals are
delivered through the audio output.)

Note

-

If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 18 to 19)

- The number and position of the jacks may vary depending on the TV set. 

Please refer to the user's manual of your TV.

-  Please do not connect  the S-Video and Component Video (Y, Pb, Pr) outputs simultaneously, as they may

interfere and degrade both video outputs quality.

- When using an HDMI connection, S-Video will not be output.

1

Using an S-V

ideo cable (not included), connect the 

S-VIDEO

OUT

jack on the rear of the DVD player to the 

S-VIDEO IN

jack of your 

TV.

2

Using the audio cables, connect the 

AUDIO (red and white)

OUT

jacks on the rear of the DVD player to the 

AUDIO (red

and white) IN

jacks of your 

TV. 

Turn on your DVD player and TV.

4

Press the input selector button on your 

TV remote control until

the S-Video signal from the DVD player appears on your TV
screen.

3

Set the V

ideo Output to 

S-V

ideo

in the Display Setup menu.

(See pages 52 to 54)
You can also use the 

VIDEO SEL.

button to change the V

ideo

Output mode. (See page 12)

RED

WHITE

RED

WHITE

Audio Cable
(Included)

S-Video Cable
(not included)