English - 20
SETUP
Configuring the Setup Menu
Menu Language
You can set the menu language.
Time
Clock
Setting the clock is necessary in order to use the various timer features of the TV.
The current time will appear every time you press the
INFO
button.
If you disconnect the power cord, you have to set the clock again.
Clock Mode
You can set up the current time manually or automatically.
Auto
: Set the current time automatically using the time from the digital broadcast.
Manual
: Set the current time to a manually specified time.
Depending on the broadcast station and signal, the auto time may not be set correctly. If this occurs, set the time
manually.
The Antenna or cable must be connected in order to set the time automatically.
Clock Set
You can set the current time manually.
Set up this item when you have set
Clock Mode
to
Manual
.
You can set the day, month, year, hour and minute directly by pressing the number buttons on the remote control.
Sleep Timer → Off / 30 min / 60 min / 90 min / 120 min / 150 min / 180 min
The sleep timer automatically shuts off the TV after a preset time (30, 60, 90, 120, 150 and 180 minutes).
The TV automatically switches to standby mode when the timer reaches 0.
To cancel the
Sleep Timer
function, select
Off
.
Press the
TOOLS
button to display the
Tools
menu. You can also set the sleep timer by selecting
Tools → Sleep Timer
.
Timer 1 / Timer 2 / Timer 3
Three different on / off timer settings can be made. You must set the clock first.
On Time
: Set the hour, minute, and activate / inactivate. (To activate the timer with the setting you’ve chosen, set to
Activate
.)
Off Time
: Set the hour, minute, and activate / inactivate. (To activate the timer with the setting you’ve chosen, set to
Activate
.)
Volume
: Select the desired turn on volume level.
Antenna:
Select
Air
or
Cable
.
Channel
: Select the desired channel.
Repeat
:
Select
Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun
, or
Manual
.
When
Manual
is selected, press the ► button to select the desired day of the week. Press the
ENTER
E
button over the
desired day and the
c
mark will appear.
You can set the hour, minute and channel by pressing the number buttons on the remote control.
Auto Power Off
When you set the timer On, the television will eventually turn off, if no controls are operated for 3 hours after the TV was
turned on by the timer. This function is only available in timer On mode and prevents overheating, which may occur if a TV is
on for too long time.
Broadcast
Subtitle
You can activate and deactivate the subtitles. Use this menu to set the Subtitle Mode.
Normal
under the menu is the basic subtitle
and
Hard of hearing
is the subtitle for a hearing-impaired person.
Subtitle → Off / On
Switches subtitles on or off.
Mode → Normal / Hard of hearing
Sets the subtitle mode.
Subtitle Language
Set the subtitle language.
¦
❑
❑
N
N
●
–
–
N
N
●
N
N
N
N
T
●
●
●
●
●
●
N
N
N
❑
■
●
●
●
Plug & Play
Menu Language : English ►
Time
Broadcast
Security
General
Setup
[Rus]BN68-02391F_01L02.indb 20
2009-7-7 15:19:02
