16

CHANGING THE INTERIOR LIGHT

INTERIOR LIGHT IN THE REFRIGERATOR .

Before changing the interior light, unplug the refrigerator from the power supply. If you
have difficulty in changing the light, contact your service center.

WARNING

Pull out the screw cap 

➀ 

and

remove the screw.

Push the lamp cover in the
direction of the arrows.

After changing the bulb,
reattach the light cover
and screw it in again.

Pull out the screw cap 

➀ 

and

remove the screw.

Take the lamp cover out in the
direction of the arrows.

After changing the bulb,
reattach the light cover
and screw it again.

CLEANING THE ACCESSORIES

Upper

Lower (optional)

Deodorizer

•

Remove the cover with a flat blade screw driver as shown.

•

Take out the cartridge from the cover and soak it in clean, warm water  

at least than 4 hrs. Completely dry out the cartridge with sunlight for at least 8 hrs in
an open area.

•

Repeat this process once or twice a year.

•

If  it is dried in a confined area, odor may be spread to that area.

•

Keep the children away from yellow water, they may drink water.

NOTE