Copying
_ 32
5.
Press the left/right arrow until the size setting you want appears and press
OK
.
6.
Press
Stop/Clear
to return to ready mode.
To scale the copy by directly entering the scale rate:
1.
Press
(Copy) on the control panel.
2.
Press
Menu
until
Copy Setup
appears.
3.
Press the left/right arrow until
Default-Change
appears and press
OK
.
4.
Press the left/right arrow until
Reduce/Enlarge
appears and press
OK
.
5.
Press the left/right arrow until
Custom
appears and press
OK
.
6.
Press the left/right arrow or numeric keypad to enter the copy size you want. Pressing and holding the left/right
arrow allows you to quickly scroll to the number you want.
7.
Press
OK
to save the selection.
8.
Press
Stop/Clear
to return to ready mode.
When you make a reduced copy, black lines may appear at the bottom of your copy.
Changing the default copy settings
The copy options, including darkness, original type, copy size, collation and number of copies, can be set to those most
frequently used. When you copy a document, the default settings are used unless they have been changed by using the
corresponding buttons on the control panel.
1.
Press
(Copy) on the control panel.
2.
Press
Menu
until
Copy Setup
appears.
3.
Press the left/right arrow until
Default-Change
appears and press
OK
.
4.
Press the left/right arrow until the setup option you want appears and press
OK
.
5.
Press the left/right arrow until the setting you want appears and press
OK
.
6.
Repeat steps 4 through 5, as needed.
7.
Press
Stop/Clear
to return to ready mode.
While you are setting copy options, pressing
Stop/Clear
cancels the changed settings and restores the defaults.
Setting copy timeout
You can set the time the machine waits before it restores the default copy settings, if you do not start copying after
changing them on the control panel.
1.
Press
Menu
until
Copy Setup
appears.
2.
Press the left/right arrow until
Timeout
appears and press
OK
.
3.
Press the left/right arrow until the time setting you want appears.
Selecting
Off
means that the machine does not restore the default settings until you press
Start
to begin copying, or
Stop/Clear
to cancel.
4.
Press
OK
to save the selection.
5.
Press
Stop/Clear
to return to ready mode.
