14

CLEANING THE WATER DISPENSER

Connection path
Wipe out the connection path and surrounding area with a clean
damp cloth.

Cup Support / Dispenser Tray

1

Cup support/Dispenser tray
Press “PUSH” behind the cup support slightly, then
remove the cup support.

2

Using the dispenser tray handle, remove the tray.

3

Empty the water in the dispenser tray, then clean it using
warm water and detergent.

Dispenser tray

Cup support

Water Tank / Supply Device

1

Pull upward and disassemble the hooks on both
sides of the large-sized cap.

2

Loosen the water supply device by turning it in the
direction of the arrow and removing it.

3

Wipe the large-sized cap and the exclusive water tank
with warm water and detergent.
• Hold the cap and pull it upwards to remove it. Clean the

cap and waste filtering bottle attached to the cap with a
soft brush.

4

After cleaning the water supply device with a soft
brush, press the water supply device operation lever,
then wash it in running water.

• Clean the water tank frequently if it used to dispense tea or other such beverages. Only use

filtered tea. For better hygiene, beverages with a high sugar content (juice, soft drinks) are not
recommended.

• Deposits can be cleaned by wiping the tank with a cloth dampened in vinegar or salt water.
• Check that the rubber seal on the water supply device has not slipped off or is not damaged

by a sharp-edged object. Otherwise, it may leak.

Caution

SR-L39-ENG(NEW)  3/30/59 9:38 AM  Page 14