![background image](/i/sony/168123/sony-trinitron-kv-32fq80k/h/sony-trinitron-kv-32fq80k-077.png)
Advanced Operation 19
Manual Programme Preset menu
The ‘Manual Programme Preset’ option in the ‘Manual Set Up’ menu allows you to manually
tune in channels. With the ‘Manual Programme Preset’ option highlighted, press
b
to enter the
‘Manual Programme Preset’ menu. Press
v
or
V
to highlight the channel you wish to tune. Press
b
twice to select the SYS column. Press
v
or
V
to select the TV broadcast system (B/G for
western European countries, D/K for eastern European countries or EXT for an external input
source). Press
b
to confirm and select the CH column. Press
v
or
V
to select the channel tuning
(C for terrestrial channels, S for cable channels or F for direct frequency input). Press
b
to
confirm. You now need to tune the channel by one of the following methods:
(a)
If you know the channel number of the TV broadcast, the VCR test signal or the
frequency:
Press the
numbered
buttons on the remote control to enter the channel number. Press
OK
to store.
(b)
If you do not know the channel number:
Press
v
to select SEARCH. The TV set automatically searches for the next available TV
broadcast channel or the VCR test signal. When a channel has been found press either
OK
to store or
v
to continue searching.
(c)
For external input sources (EXT):
Press
v
to select AV1, AV2, AV3, AV4 or AV5 depending on which socket you have
connected your equipment to. Press
OK
to store.
Labelling a channel
Names for channels are usually taken automatically from Teletext (if available). This name will
be displayed briefly on screen when the channel is selected. The ‘LABEL’ option in the ‘Manual
Programme Preset’ menu allows you to assign a name of your choice up to 5 characters or
numbers. With the ‘Manual Programme Preset’ option highlighted, press
b
to enter the ‘Manual
Programme Preset’ menu. Press
v
or
V
to highlight the channel number you require. Press
b
repeatedly to select the
LABEL column. Press
v
or
V
to select the first character. Press
b
to
confirm this character. Select the other characters in the same way. After selecting all required
characters, press
OK
to store.
Skipping a channel
The ‘SKIP’ option in the ‘Manual Programme Preset’ menu allows you to skip unused channel
positions when selecting channels with the
PROG+/-
buttons. However, you can still select
skipped channels by using the
numbered
buttons on the remote control. With the ‘Manual
Programme Preset’ option highlighted, press
b
to enter the ‘Manual Programme Preset’ menu.
Press
v
or
V
to highlight the channel number you require. Press
b
to select the
SKIP column.
Press
v
to select On (select Off to remove the SKIP feature). Press
OK
to store.
32FQ80 B5 Part 5.fm Page 19 Wednesday, May 29, 2002 10:00 AM