![background image](/i/sony/168423/sony-trinitron-kv-az212m91/h/sony-trinitron-kv-az212m91-010.png)
Sony KV-AZ212M91 Group B25 (
GB
(dummy))_2-687-422-E2 (1)
Picture slant
Abnormal color
patches
Teletext display
is incomplete
(snowy picture
or double images).
TV cannot receive
stereo broadcast
sound.
or
Stereo broadcast
sound switches on
and off or is
distorted.
TV cannot receive
FM radio station.
The
1
(standby)
indicator on your
TV flashes red
several times after
every three
seconds.
The TV screen
sometimes goes
blank for
slightly longer
than usual
during channel
change.
TV cabinet creaks.
A small “boom”
sound is heard
when the TV is
turned on.
• Keep external speakers or other electrical equipment away from the TV.
• Display the “Setup” menu and adjust “Picture Rotation” so that the
picture position is optimal (see
N
).
• Keep external speakers or other equipment away from the TV. Do not
move the TV while the TV is turned on. Press
!
(main power) on the TV
to turn off the TV for about 15 minutes, then turn it on again to
demagnetize the TV.
• Check the antenna cable and connection on the TV, VCR and at the wall
(see
E
).
• Check the antenna setup. Contact a Sony dealer for advice.
• Display the “Channel Setup” menu and set the “Signal Booster” to “Auto”
from “Manual Program” (see
M
).
• Try using an external booster.
• Use the fine tuning (“Fine”) function (see
M
).
• Check the antenna cable and connection on the TV, VCR and at the wall
(see
E
).
• Check the antenna setup. Contact a Sony dealer for advice.
• Connect a separate FM antenna and the TV channel source through an
antenna selector (switch) to your TV (see
E
).
• Count the number of times the
1
(standby) indicator flashes.
Press
!
(main power) to turn off your TV. Contact your nearest Sony
service center.
• The “Signal Booster” is functioning to detect a weak signal. This does not
indicate a malfunction.
• Changes in room temperature sometimes make the TV cabinet expand or
contract, causing a noise. This does not indicate a malfunction.
• The TV’s demagnetizing function is working. This does not indicate a
malfunction.
Symptom
Solutions
Troubleshooting (continued)
01GB03INS-SOEMRus.p65
5/15/07, 2:04 PM
10
Black