![background image](/i/sony/168423/sony-trinitron-kv-az212m91/h/sony-trinitron-kv-az212m91-018.png)
Sony KV-AZ212M91 Group B25 (
GB
(dummy))_2-687-422-E2 (1)
L
Changing the “Sound” setting
The “Sound” menu allows you to adjust settings below.
1
Press WEGA GATE and select “Settings”.
2
Press
V
or
v
to select the “Sound” icon ( ), then press
.
3
Press
V
or
v
to select the desired item (e.g., “Sound Mode”), then press
.
Select
To
“Sound Mode”
choose either “Dynamic” (low and high tones), “Standard”
(voice and high tones) or “Custom”*.
“Balance”
Press
v
or
B
to emphasize the left speaker.
Press
V
or
b
to emphasize the right speaker.
“Intelligent Volume”
adjust the volume of all program numbers and video inputs
automatically.
Press
V
or
v
to select “On”, then press
.
To cancel, select “Off”, then press
.
“Surround”
choose either “TruSurround”(surround sound that spreads
out to the rear of a room), “WOW”** (full, deep bass sound),
“Simulated” (stereo-like monaural sound) or “Off”.
* You can adjust the setting to your personal preference in the “Sound Adjustment”
option only when the “Custom” mode is selected.
** BBE High Definition Sound is fully activated maximizing the sound effect in the WOW
mode.
Note
• “Intelligent Volume” is not selectable when “TruSurround” is selected.
Adjusting the “Sound Adjustment” items under “Custom”
mode
The 5-Band Graphic Equalizer feature allows you to adjust sound frequency settings
of “Custom” mode in the menu.
1
Make sure that “Adjust” is selected, then press
.
Selecting “Reset” will set your TV to the factory settings.
2
Press
B
or
b
to select the desired sound frequency, then press
V
or
v
to
adjust the setting and press
.
The adjusted settings will be received when you select “Custom”.
Notes
• Adjusting higher frequency will affect higher pitched sound and adjusting lower frequency
will affect lower pitched sound.
• You may display the settings directly by using button on the remote control (see
G
).
01GB04AVD-SOEMRus.p65
5/15/07, 2:06 PM
18
Black