www.timberk.com • electric convector heater
4
3. OPERATIONAL CHARACTERISTICS
Table 1
Fig. 1
Technical characteristics
Technical characteristics of the convector are given in Table 1.
For a detailed description of technical parameters and characteristics go to
www.timberk.com or contact TIMBERK official dealers.
IMPORTANT!
The manufacturer reserves the right to change the set-list
of the device (including liquid and powder components)
for different supplies without prior notice. The changes
either in no way influence the basic technical parameters
of the device or may improve them, and also not violate
the legislation or quality standards of the countries of
manufacture, transit and selling.
The changes in the set-list may result in changing of the
weight and dimensions of the device, but not more than
by +\- 5-20% (depending on the product category)
Operating principle
Cool air in under part of the room pass through the heating element of the
convector. Then the heat flow expands, uprushes through the outlet grill
and extends over the room. At that, direction of the flow set by the grill
inclination creates a favourable, accelerated circulation of warm air inside
the room without dispersing it on walls and windows.
Key features
1. Combination of convection effect (hence the name of ‘convector’) with
soft heat emission makes the heater an efficient source of heat energy with
increasing number of users.
2. Simple and efficient opportunities for control over temperature conditions.
3. High-precision controllable thermostat.
4. Quick self-repayment due to high efficiency and rate of set temperature
development.
5. Simplicity of installation, operating reliability and servicing ease.
6. Three-mode heating for energy saving.
7. Built-in drop sensor will disconnect the convector if it is deflected from
vertical position e.g. if it is accidentally overturned when used on legs.
Convector dimensions depending on power (Fig.1)
Convector heaters of the Timberk series are divided by maximum power
consumption of heating element and differ from each other by the length,
while having equal height and depth. (Standard overall height of all the
appliances is 440 mm). This scheme for arrangement of overall dimensions
allows to use Timberk convectors with various power in the same room
without breaking of familiar symmetry.
455 mm
1000 W
1500 W
2000 W
455 mm
615 mm
775 mm
Model
Rated
voltage,
V/Hz
Operating power
consumption (on
modes), W
Rated
curren, A
Net
weight,
kg
Overall
dimensions,
mm
Waterproof
class
Electric
protection
class
TEC. E3 M 1000
~220-
240/50
450/550/1000
4.5
3.6
440х455х130
IP24
Class I
TEC. E3 M 1500
~220-
240/50
650/850/1500
6.8
4.3
440х615х130
IP24
Class I
TEC. E3 M 2000
~220-
240/50
850/1150/2000
9.1
5.2
440х775х130
IP24
Class I
TEC. E5 M 1000
~220-
240/50
450/550/1000
4.5
3.6
440х455х130
IP24
Class I
TEC. E5 M 1500
~220-
240/50
650/850/1500
6.8
4.3
440х615х130
IP24
Class I
TEC. E5 M 2000
~220-
240/50
850/1150/2000
9.1
5.2
440х775х130
IP24
Class I
