![background image](/i/toyota/147677/toyota-venza-2011/h/toyota-venza-2011-497.png)
536
4-3. Do-it-yourself maintenance
VENZA_U (OM73012U)
n
After a fuse is replaced
l
If the lights do not turn on even after the fuse has been replaced, a bulb
may need replacement. (
l
If the replaced fuse blows again, have the vehicle inspected by your
Toyota dealer.
n
If there is an overload in the circuits
The fuses are designed to blow, protecting the wiring harness from damage.
CAUTION
n
To prevent system breakdowns and vehicle fire
Observe the following precautions.
Failing to do so may cause damage, and possibly a fire or injury.
l
Never use a fuse of a higher amperage rating than indicated, or use any
other object in place of a fuse.
l
Always use a genuine Toyota fuse or equivalent.
Never replace a fuse with a wire, even as a temporary fix.
This can cause extensive damage or even fire.
l
Do not modify fuses or the fuse box.
NOTICE
n
Before replacing fuses
Have the cause of electrical overload determined and repaired by your
Toyota dealer.
OM73012U_VENZA_U.book Page 536 Wednesday, September 28, 2011 8:13 AM