E. Frequency Measurement

 (see figure 7)

Warning

To avoid harms to you or damages to the Meter
from eletric shock, do not attempt to measure
voltages higher than 600V AC/DC, although
readings may be obtained.

The resistance ranges are:
10Hz, 100Hz, 1kHz, 10kHz, 100kHz, 1MHz and
10MHz.

To measure frequency, connect the Meter as follows:

Insert the red temperature probe into the Hz
Duty% 

terminal and the black temperature

probe into the 

COM

 terminal.

1.

2.
3.

(figure 7)

Red

Black

Set the rotary switch to 

Hz

.

Connect the test leads across with the object being   measured.
The measured value shows on the display.

Model UT203/204: OPERATING MANUAL

26