![background image](/i/uni-t/148683/uni-t-utm-1232-ut232/h/uni-t-utm-1232-ut232-012.png)
11
Model UT232: OPERATING MANUAL
Button
At active power (main display) + phase
angle (secondary display) mode, press
SELECT
button to step through first phase,
second phase, third phase and sum of
watts.
At other mode, press
SELECT
to step
through first phase, second phase and the
third phase.
Press to start recording of minimum value,
it valid at voltage, current, active power
and apparent power ranges only.
Press once at LOAD mode, MR icon
shown, the Meter displays the previous
stored reading, the left secondary display
showing the index decrease one.
Press once at mode, CAL icon shown,
SELECT
MIN /
Button
the Meter steps through sum of active
power (main display) + sum of reactive
power (secondary display) and sum of
power factor (main display) + sum of
apparent power.
CLEAR
Operation Performed
to exit. The maximum number of data store
is 99, when it achieves 99, the Meter shows
FUL. Press
CLEAR
to clear the stored
reading in order to store next reading.
Operation Performed
At active energy range, press to reset
time the zero, then restart the timing.
At all other ranges, press to clear stored
readings.