ENGLISH

5

set the 

BAND

 switch to the corresponding 

position.

3.  Rotate the TUNING control to select the de-

sired radio station. 

4.  When tuning to the station, transmitting a 

stereo signal, the FM ST indicator will light 
up.

5.  After you finish listening to the radio set the 

FUNCTION

 switch to the OFF position.

Antenna

For better reception in the FM band, extend the 
antenna fully and orient it at the desired angle. 

For better reception in the АM band, orient the 
unit at the desired angle. 

Playback of CD discs

Note:

Loading – Open the disc compartment. Insert a 
CD disc and close the battery compartment lid 
(22).
Ejection – After the playback is finished, open 
the disc compartment lid and eject the disk.  
Put it in a box.
Always close the disc compartment lid to pre-
vent dust getting into it. Always eject the disc 
from the compartment, if it was not played back.

1.  Switch on the unit.
2.  Select the CD discs playback mode. Set the 

FUNCTION

 switch to CD/ MP3/ USB. 

3.  Open the disc compartment. Insert a disc 

and close the compartment lid. Make sure 
that the disc is inserted properly – the label 
upwards. 

4.  The number of the tracks will appear on the 

LCD-display. 

5.  The playback will start automatically.

Playback

In the playback mode press the 

PLAY/PAUSE 

button, the playback of the disc will start.

Pause

To pause the playback, press the 

PLAY/PAUSE

button in the playback mode.  
To resume the playback press the 

PLAY/PAUSE 

button once again.

Stop

1.  To stop playback, pres the 

STOP 

button. The 

number of the tracks will appear on the LCD-
display. 

Moving to the beginning of the track, to the 
next and to the previous track

1.  To move to the next/previous track, press the 

SKIP+

 or 

SKIP- 

once.

2.  To quickly move to the necessary part of the 

played back track, press and hold the 

SKIP+

or 

SKIP-

 buttons correspondingly.

Selecting album

You can select the necessary album, pressing 
the 

ALBUM 

button.

Repeat playback of a disk or a track

1.  To repeat one track, press 

MODE 

once, 

“REP” will be flashing on the LCD-display.

2.  To repeat one album, press the 

MODE

 but-

ton twice, “REP ALBUM” will be flashing on 
the LCD-display.

3.  To repeat all tracks on the disc, press the 

MODE 

button thrice, “REP ALL” will be flash-

ing on the LCD-display.

Random playback

1.  To playback all tracks on the disc in a random 

order, press the 

MODE

 button four times in 

the stop mode, “RAND” will appear on the 
LCD-display. Press the 

PLAY/PAUSE

 button, 

random playback of the tracks will start.

2.  To cancel random playback, press the 

MODE 

button once again, “RAND” will dis-

appear from the LCD-display.

PROGRAMMING THE PLAYBACK

You can program playback of tracks (maximum 
20 tracks from a CD disc and 99 tracks from a 
МР3 disc) in the desired order. 
1.  When the playback is stopped, press the 

PROG 

button once. “PROG” and the number 

of the track while programming “P01” will ap-
pear on the LCD-display

2.  Select the desired track, consequently press-

ing the 

SKIP+

 or 

SKIP- 

button. 

You can select the necessary album, pressing 
the 

ALBUM 

button.

3.  To store the selected track, press the 

PROG

button once again. 

  The number of the track will change to 

“Р02”».

4.   Programming of the following track: select the 

next track, consequently pressing the 

SKIP+

3468IM.indd   5

3468IM.indd   5

27.07.2010   15:43:21

27.07.2010   15:43:21