![background image](/i/vitek/152595/vitek-vt-3589-gy/h/vitek-vt-3589-gy-006.png)
Headphones output
Connect headphones to the jack (13)
the receiver speaker will automati-
cally turn off and you can now listen to
the radio through your headphones.
Backlight button
All the buttons on the front side con-
trol the backlight function; press any
of them to turn on the backlight, which
is helpful when using the receiver in
the dark.
Setting the time
The receiver uses a 24-hour time for-
mat. The clock shows 12:00 when
batteries are first installed or an exter-
nal power supply is first connected.
Time setting
1. In clock mode, press the Band
selection / Set time button (8)
one time the time appears;
within 5 seconds, press the
Setting + or (5) buttons to set
the desired hour.
2. In clock mode, press the Band
selection / Time set button (8)
two times to set the desired min-
utes.
ALARM
Setting the alarm
1. In clock mode, press the Band
selection / Time set (8) button
three times the display will show
the symbol, which means the set
hour function in activated. Press
the Setting + or (5) buttons to
set the desired hour.
2. In clock mode, press the Band
selection / Time set (8) button 4
times the display will show the
symbol, which means the set
minutes function is activated.
Press the Setting + or (5) but-
tons to set the desired minutes.
6
ENGLISH
Blinking
hour
indicator
Blinking
minute
indicator
Blinking
hour
indicator
VT_3589.qxd 17.02.05 13:56 Page 6