![background image](/i/zanussi/160280/zanussi-fe-1014-n/h/zanussi-fe-1014-n-010.png)
10
Use
FABRICS
OPTIONS
SPIN SPEED
TEM
PERATURE
FE 1014 N
SYNTHETICS
DELICATES
COTTONS
WOOL
60°C
40°C
95°C
30°C
1000
900
700
500
RINSE
HOLD
START/PAUSE
RESET
SKIP
SUPER
RINSE
QUICK
ON/OFF
COLD
PREWASH
1
2
3
4
5
6
7
8
9
Control panel
1 ON/OFF button
Press this button to switch the washing machine on.
Press the ON/OFF button again to switch the
machine off.
2 MAINS-ON light
This light is connected to the ON/OFF button. It
lights up when you press the button, and goes out
when you press it again.
3 FABRIC button
Press this button repeatedly to select the programme
on the basis of the type of laundry to be washed. The
light relevant to the selected programme will light up.
The washing machine will propose a temperature and
automatically select the maximum spin value
provided for the programme you have chosen. You
can change these values by operating buttons 4 and
5.
4 TEMPERATURE button
Press this button repeatedly to increase or decrease
the temperature, if you want your laundry to be washed
at a temperature different from the one proposed by
the washing machine. The relevant light will light up.
Maximum temperatures are 95°C for cotton, 60°C for
synthetic fabrics, 40°C for delicate fabrics and wool.
By selecting position COLD the machine will wash with
cold water. To be used for extremely delicate items,
such as curtains.
Important!
By depressing TEMPERATURE and SPIN SPEED
buttons simultaneously, the acoustic signal at the
end of the cycle is suppressed.
5 SPIN SPEED button
Press this button repeatedly to change the spin
speed, if you want your laundry to be spun at a
speed different from the one proposed by the
washing machine. The relevant light will light up.
Maximum speeds are:
• for cotton: 1,000 rpm
• for synthetic fabrics and wool 900 rpm;
• for delicate fabrics: 700 rpm.
RINSE HOLD position
: when you choose this
option, the machine will not drain the water of the
last rinse, so as not to wrinkle the laundry.
At the end of the cycle, the light of the
START/PAUSE button will flash, to indicate that the
water must be drained.
To complete the cycle, choose one of the following
options:
•
Draining and spin:
- Press the START/PAUSE button.
The machine
will drain the water, then spin the laundry at the
maximum speed provided for the selected
programme.
- Select spin speed
by means of button 5, and
press the START/PAUSE button.
•
Drain only
- Press the RESET button
once
, so as to cause
the DRAIN light
to light up, then press the
START/PAUSE button.
132996790.qxd 10/12/01 12:20 PM Pagina 10 (Nero/Process Black pellicola)