![background image](/i/zelmer/155566/zelmer-23z012/h/zelmer-23z012-060.png)
60
Properly installed ducts are shown in the picture below (if you install the ducts onto a wall, the height of the installation should be between 40
and 130 cm).
If the duct needs to be bent, please follow the instructions in the pictures below during installation.
An example of an improperly installed duct. This may cause failure of the air conditioner or its improper functioning.
Window installation kit
The air conditioner set is equipped with a window slider designed to fit “vertical” or “horizontal” window applications. It facilitates the instal
-
lation of air inlet/outlet ducts. However,
it may be necessary to modify some aspects of the installation procedure for certain types of
windows.
Please follow the instructions in the pictures below concerning the minimum and maximum window openings.
Attach the window slider to the slat using two screws (see picture below).
The installation of the water drainage hose
Install the water drainage hose in the opening on the back of the appliance. Make sure
the drainage hose is correctly positioned in order to avoid the improper functioning of
the eclectic control (see picture below).
60 cm
50 cm
50 cm
Slat 1
Slat 2
Water
drainage
opening
Horizontal window
Window slider kit:
Minimum 67.5 cm
Maximum 123 cm
Vertical window
Window slider kit:
Minimum 67.5 cm
Maximum 123 cm
130 cm
40 cm